Get a Free Door Installation Estimate in Minutes
Replacing an entry door or hanging new interior doors? Pick the door type, the room, and when your house was built, and you’ll see what the labor runs, including the extra work older St. Louis homes often need. No email needed to see the price.
Door Installation Estimate
M Hope Carpentry · St. Louis
Not sure? Enter your address below and use the button to look it up on Zillow.
Property addressYear built will be listed under Facts & Features on the Zillow listing.
Replacement or new work? · Full unit or slab?
* All prices reflect labor only. Entry door unit replacements include foam sealant and silicone as consumables. Final pricing determined after site visit. Actual costs may vary based on structural conditions, out-of-square openings, or other site-specific factors. This estimate is not a contract.
Door pricing questions
How much does door installation cost in St. Louis?
My labor rates:
- Entry door, full unit replacement: $600
- Entry door, slab only: $500
- Interior prehung: $240 replacement, $180 new work
- Interior French door: $320 replacement, $260 new work
- Interior slab replacement: $280
- Interior French slab pair: $420
- Bifold: $120 single, $200 double
- Bypass: $180 replacement, $160 new work
- Cased opening: $340 replacement, $280 new work
What's the difference between replacement and new work?
Replacement means an old door comes out and a new one goes in the same opening. New work means the opening is already framed with no door in it yet, so there's nothing to remove.
Full unit or slab: which do I need?
A slab is just the door. A full unit (prehung) comes with its own frame. If your frame is solid and square, a slab may be all you need. If the frame is damaged, rotted, or out of square, you need a full unit.
Why does the year my home was built matter?
Two reasons:
- Before 1978: I assume lead paint, so Lead Safe Work Practices apply, adding $180 per affected door. I'm EPA RRP certified. What lead paint means for your project · My RRP certification
- Before 1965: I assume masonry walls, which take more work to cut into and anchor to, adding $180 per affected door. Basement entry doors are assumed to be masonry too.
Why does a second floor cost more?
It's more trips up and down the stairs with the door, tools, and debris. That adds $80 per interior door and $120 per entry door.
Why does a garage entry door cost more?
A door between the garage and the house has to be fire rated. Fire doors need self-closing hinges, and the door has to close and latch on its own with nobody touching it. The $60 covers adjusting the hinges and getting the latch exactly right. I'm particular about latches on every door, but on a fire door it matters more.
What are the transom options?
If there's a transom window above the entry door, there are two ways to handle it:
- Replace it with the door (+$100): the transom comes out with the old frame, and the new unit fills the full height. It's a taller unit than a standard door frame, so it's priced like an oversized door.
- Keep the transom (+$180): I cut the old door jamb away from the transom, leave the transom in place and secure it to the building, then trim the new prehung frame so it ties cleanly into the existing transom.
Which one makes sense depends on the site and your budget.
Why would I need an extra hole drilled?
Some handle sets, like a separate deadbolt or a handle set with a thumb latch, need a second bore through the door. That adds $85.
What's the foam and silicone charge?
Every entry door unit gets sealed with OSI Quad foam and clear silicone. That's $38.14 in materials.
Why does an oversized opening need a site visit?
Openings wider than 4 feet or taller than 6'8" vary too much to price from a form. I'll measure and price it in person.
Is this a quote?
No. It's an estimate built from my standard rates, so you can see a realistic number before we meet. The final price is set after I see the job in person.
Does the price include materials?
No. The estimate covers labor only. Materials are separate, and I'm happy to talk through options when I see the job. Entry door replacements include the foam sealant and silicone I use to seal the unit.
Why is there a $300 minimum?
Every job has a $300 service call minimum. It covers the drive, setting up my tools, and cleaning up, even when the job is one cut or one door. If your estimate comes in under $300, you'll still see your real numbers, then the minimum line, so nothing surprises you later.
How does the service area work?
I work out of south St. Louis city. That covers the whole city, North County, South County, and the suburbs inside 270. Near the edges, a job has to be big enough to be worth the drive. Enter your zip and the estimate tells you where you stand.
What happens after I send my estimate?
You get a copy by email. If you asked for a site visit, I'll reach out within 1 to 2 business days to set up a time from the availability you picked.